Everbuild Ultra Hard Floor Varnish is a clear quick drying varnish which is ideal for use on most common types of wooden floors including hardwood, softwood, hardboard, chipboard and composite wooden boards.
Everbuild Ultra Hard Floor Varnish has been specifically developed to provide an ultra-hard scratch resistant natural finish to most interior wooden floors. Suitable for use in kitchens, bathrooms, lounges, dining areas or where heavy foot traffic would be expected. The floor varnish provides superior protection for wooden floors and has a hammer hard, tough finish to protect wood against scratches and spills.
Touch dry in 30 mins.
Up to 16 square metres per litre. Coverage will vary depending on the absorbency of the wood.
- Low Solvent Formula
- Touch dry in 30 minutes.
- Protects wood against scratches and spills.
- Clear finish, no discoloration.
On unvarnished floors ensure wood is clean, dry and free from dirt or dust by wiping with a soft cloth and white spirit. Any existing coatings must be removed prior to application with a suitable sander using 120 grade abrasive paper. A suitable dust mask should be worn while sanding. Allow any dust to settle then vacuum the floor to remove any dust or debris. Fill in any holes or surface imperfections using Everbuild Multi-Purpose Wood Filler.
Existing varnished floors should be thoroughly sanded using 120 grade abrasive paper to provide a key for Everbuild Ultra Hard Varnish to be applied. Floors should be vacuumed, wiped down with white spirit and allowed to dry. Any existing varnish in poor condition should be completely removed prior to application.
Stir product well before use and periodically during application. Brush apply Everbuild Ultra Hard Floor Varnish following the direction of the wood grain. Apply a minimum of 3 coats allowing 1 hour between coats. Lightly sand the surface before applying the final coat. Always apply the varnish to a wet edge working systematically across the surface keeping the wet edge together as much as possible to avoid overlap.
Ultra Hard Floor Varnish can be walked on after approximately 8 hours depending on ambient temperature and conditions. Allow 72 hours before subjecting to heavy foot traffic. Do not cover with carpets or rugs for at least 7 days. Protect from water for 5 days. Clean brushes thoroughly after use with warm soapy water.
2.5 Litre - Also comes in 750ml tin.
We deliver throughout the UK and delivery times are 3 working days or better.
Should you need faster delivery, this can often be arranged. Please phone us with your specfic requirements.
Our returns policy allows you to return any item if it is not what you require within 14 days of receipt. This is as long as it has not been used and is returned in its original undamaged packaging.
Full details are in our Delivery and Returns page.