Welcome to the DIY Doctor's Blog

Posted by: dcjjones |  Posted on: December 16, 2009 | 1 Comment »

Consider this is a problem with the electric control panel, but would appreciate any feed back. Washing machine switched on. 30 mins cycle. Fills with water then stops. Drum does not turn. Press stop/pause/cancel button. Cycle displays 2 mins. Nothing happens. By pressing stop/cancel/pause washer pumps for 2 secs and stops. Press same button again Read on…

Posted by: jenny |  Posted on: December 16, 2009 | 1 Comment »

I recently had a new boiler and pressurised tank system installed . ” problems seem to be occurring 1. water pressure drops when a tap is turned on resulting in cold shower. I was under the impression this should not happen with a pressurised system. 2. When the water heating programme is on the radiators Read on…

Posted by: Optymystic |  Posted on: December 16, 2009 | 1 Comment »

20 N per square mm is equivalent to 2kg force on each square mm which seems like rather a lot. It is equivalent to 2 million kg on each square metre or 2000 tons. Is there something amiss with my arithmetic?