3 Panel Featheredge Fence and Concrete Post not Quite Straight


Postby Revinkevin » Thu Jun 09, 2016 8:51 pm

Hi,

I am planning on building a 3 panel featheredge fence. 1ft gravel board. 5ft panels. On the left exists a corner post. 2 new panels and posts will leave thearly corner post on the 90 degree angle. The 3rd panel needs to be at a slight angle. On its right will be an end post. Will this slight angle be OK or will it put strain on the gravel board? How are awkward angles normally tackled?

Thanks
Revinkevin
Rank: Labourer
Progress to next rank:
25%
Posts: 2
Joined: Thu Jun 09, 2016 8:45 pm

Sponsor

Simply Build It

Postby tileclipproman » Fri Jun 10, 2016 11:45 am

as long as the fence sits on the gravel board you can have any angle
you need.
tileclipproman
Rank: Ganger
Progress to next rank:
20%
Posts: 80
Joined: Fri Dec 11, 2015 11:25 pm

Postby Revinkevin » Fri Jun 10, 2016 7:11 pm

Thank you but how so? The gravel board needs to slot inside the grooves on the post. Surely if there it too much angle the gravelboard won't fit, will and have too much pressure on it?
Revinkevin
Rank: Labourer
Progress to next rank:
25%
Posts: 2
Joined: Thu Jun 09, 2016 8:45 pm

Display posts from previous
Sort by
Order by



  • DIY How to Project Guides

  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!



 


  • Related Topics