Add a room thermostat to heating system


Postby skybluekev » Thu Aug 07, 2008 3:15 pm

Hi,
I was looking at adding a wireless thermostat to my boiler, i was wondering if i need to get a specific thermostat to suit the specific boiler or whether i can just buy any thermostat. Also on the instructions for the boiler it says i need to get a 24v thermostat, is this standard on thermostats because some that i have looked at does not specify the voltage. Thanks, Kev
skybluekev
Posts: 7
Joined: Tue Apr 15, 2008 10:00 am

Sponsor

Simply Build It

Postby TheDoctor4 » Fri Aug 08, 2008 8:41 am

Hi Kev

Had you had a look at the DIY project on Central Heating Thermostats: http://www.diydoctor.org.uk/projects/thermostats.htm This may be of some help to you or you may wish to contact Heatmiser for some further advice.

Regards
TheDoctor4
Posts: 16777215
Joined: Tue Jul 24, 2007 9:12 am
Location: Somerset in the UK in Shepton mallet


Postby ericmark » Sat Aug 09, 2008 8:52 pm

If you need 24 volt control you would normally use something with volt free contacts. Most electronic thermostats will come with volt free contacts.
ericmark


Display posts from previous
Sort by
Order by


 


  • Related Topics

cron