Advice needed - repair lead flashing on polycarbonate roof

Postby bymster » Mon Sep 22, 2008 9:07 pm

We're desperate to do some preventative repairs on the roof of our conservatory but not quite sure about how to do this.
It has a sloping polycarbonate roof and one of the polycarbonate panels has slipped down about 10cm having been 'caught' and stopped by the gutter. The lead flashing at the top has slipped too. Each polycarbonate panel has a separate width of flashing, so it hasn't affected the rest of the roof at all.
We realise we need to push the panel back up but are unsure how one secures lead flashing. our house is red brick - this is the surface the lead flashing joins the roof to.
Thanks in advance for any advice.
Posts: 2
Joined: Mon Sep 22, 2008 8:59 pm


Simply Build It

Postby welsh brickie » Wed Sep 24, 2008 3:53 pm

the ideal solution is clear silicone.
You can bed the silicone directly on to the brickwork and stick the lead to it .
welsh brickie
Posts: 2156
Joined: Sat Apr 12, 2008 7:54 am

Display posts from previous
Sort by
Order by


  • Related Topics