Baxi Back Boiler - No Hot Water


Postby Trev37 » Tue Jan 20, 2009 4:33 pm

After a prob with the feeder tank going a bit dry - now have hot lovely hot rads, but tepid 'hot' water. :cry:

Into the airing cupboard :arrow: : HW pipe (going to the coil) is hot after leaving the manual-3-way-valve.

Could this be an air lock ? If so, can it be cleared without dismantling the system ?

Also, by the way, the 1970's 'Simplicity' manual-3-way-valve is siezed in the mid-way position. I was told they don't do them any more. Is that correct ?
Trev37
Posts: 7
Joined: Tue Jan 20, 2009 4:21 pm

Sponsor

Simply Build It


 


  • Related Topics