Baxi Solo WM 50/4RS


Postby bunts » Wed Dec 31, 2008 12:03 am

Pilot lites but goes out when turn knob to next position. Thermostat trip switch has been reset but still does not resolve the problem. For information this started after I removed and replaced two radiators to clean them through and I completely drained the whole system to do this. Before trying to restart my boiler, the heating system was refilled and air bleeded from all radiators.
bunts
Posts: 2
Joined: Tue Dec 30, 2008 11:54 pm

Sponsor

Simply Build It

Postby Steve the gas » Thu Jan 01, 2009 7:01 am

Hi Bunts,

You seem to be describing a permanent pilot that will not stay lit?

If so , the thermocouple has failed,approx £6 + fitting


Hth
Steve the gas
Posts: 780
Joined: Sun May 04, 2008 7:07 am


Postby bunts » Sat Jan 03, 2009 3:07 pm

Thanks for advice. Thermocouple changed but still not working. Engineer called and replaced the boiler thermostat which did the trick.
bunts
Posts: 2
Joined: Tue Dec 30, 2008 11:54 pm


Postby TheDoctor5 » Thu Jan 29, 2009 12:34 pm

If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.
TheDoctor5
Site Admin
Posts: 1385
Joined: Tue Jan 20, 2009 9:17 am


Display posts from previous
Sort by
Order by


 


  • Related Topics

cron