Main navigation


brittony boiler
All aspects of plumbing questions and answers, help, tips and information

4 posts   •   Page 1 of 1
sparkyfiss
Labourer
Labourer
Posts: 2
Joined: Sun Jul 27, 2008 8:57 pm

brittony boiler

Post by sparkyfiss » Sun Jul 27, 2008 9:02 pm

hi can anybody help.ive got a brittony combi boiler ,i can not get any central heating or hot water,electrics ok,but pilot light not kicking in
htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 5:22 pm

Post by htg engineer » Mon Jul 28, 2008 5:01 pm

Low system pressure ?
All controls calling for heat ?
any manual resets ?

electrics ok ?????? how do you know ?

htg
sparkyfiss
Labourer
Labourer
Posts: 2
Joined: Sun Jul 27, 2008 8:57 pm

Post by sparkyfiss » Tue Jul 29, 2008 7:31 am

pressure at 1.5 bar
controller calling heating
voltage good checked it myself,i am a sparks myself
htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 5:22 pm

Post by htg engineer » Tue Jul 29, 2008 3:27 pm

Power to PCB, Nothing going from PCB ????

Possibly PCB at fault, do you have the instructions for the boiler ? follow the fault finding chart at the back of the manual. Check to see if there's power to the fan and pump, there may be power there but they may not be working - this will keep the boiler off.

Will watch for further posts,

htg
4 posts   •   Page 1 of 1
It is currently Mon Apr 15, 2024 4:42 am
Return to “Plumbing Forum”