Central Heating - change of pipe diameter
All aspects of plumbing questions and answers, help, tips and information

3 posts   •   Page 1 of 1
misterdun
Apprentice
Apprentice
Posts: 10
Joined: Wed Jul 16, 2008 2:09 pm

Central Heating - change of pipe diameter

by misterdun » Tue Sep 02, 2008 9:07 am

Currently in my bathroom the central heating pipes (22mm) run underneath the bath but stick out into the room above the floorboards where I intend to put up a stud wall. The pipes stick out far more than required and want to move them. I am hoping to use pushfit fittings and speedfit flexible piping (15mm) which i have already bought to re-direct the pipes. Will the change in diameter cause problems or should it be okay?

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Tue Sep 02, 2008 11:42 am

What do the pipes feed ? if just one radiator then probably no problems. If it's the flow and return feeding the whole house then it needs to be kept as 22mm.


htg

misterdun
Apprentice
Apprentice
Posts: 10
Joined: Wed Jul 16, 2008 2:09 pm

by misterdun » Tue Sep 02, 2008 4:26 pm

Thanks for the reply. It is the flow and return so looks like I will have to spend a bit more money.

3 posts   •   Page 1 of 1
It is currently Mon Feb 26, 2024 3:57 pm