hello hope someone can help.
bentone ST 108 combi boiler installed
but only a 3core l/n/e from an apt timeclock to the boiler was put in for it
i know this is wrong as
there is a 6 pin plug at the boiler
i looked at the otherside where this will be plugged in and found five wires coming from it
brown blue earth red and a black of which the red and black were a smaller size
what i would like to know is, what do each of these do?
whats the red and the black for?
do they control the pump for the central heating?
should a roomstat have been fitted? to control this
ive been looking on this site and have seen stuff on volt free stats
so what type stat should be used with this bentone?
Hi, are you sure this is a 'combi' boiler?
doing a search it suggests it's actually a 'greenstar' HE oil fed floor mounted system boiler!
The hand book suggests supply as you have but directly fed not via clock, to terminals as you say plus the link wires are for external 'stats. etc.
suggest downloading book from google search and check what you have, then repost with any info. will try to help further.
If it is a combi then there must be a direct live feed or if remote clock for heating is off or room stat satisfied no hot water will be possible,
DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!