Cut Wall Chase too Deep for Sink Hot and Cold Supply


Postby Macca_andy » Mon Feb 27, 2017 9:09 pm

Hi,

I was trying to chase a wall to put a hot and cold supply in (with insulation) to a sink. I used an SDS drill with chisel and things went way too deep (eek). It's even punched through the inner wall. Any tips on what I can do to sort this out? I've uploaded a couple of pictures.
Attachments
chase-1.png
chase-1.png (186.49 KiB) Viewed 218 times
chase-2.png
chase-2.png (175.85 KiB) Viewed 218 times
Macca_andy
Rank: Labourer
Progress to next rank:
25%
Posts: 2
Joined: Mon Feb 27, 2017 8:55 pm

Sponsor

Simply Build It

Postby stoneyboy » Mon Feb 27, 2017 10:54 pm

Hi Macca_andy,
I assume you ave pushed the bricks into the cavity, if this is the case retrieve as much as you can and rebuild back of the wall chase using a sand/cement mortar.
Regards, stoneyboy
stoneyboy
Rank: Project Manager
Posts: 2745
Joined: Wed Dec 10, 2008 6:44 pm

Postby Macca_andy » Tue Feb 28, 2017 7:00 am

Cool. That's great. Thanks.
Macca_andy
Rank: Labourer
Progress to next rank:
25%
Posts: 2
Joined: Mon Feb 27, 2017 8:55 pm

Display posts from previous
Sort by
Order by



  • DIY How to Project Guides

  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!



 


  • Related Topics