Deprissurising System or Draining - How to Cut to Fit Shutoff Valves

Postby nichosi » Sun Feb 02, 2014 6:37 pm


I want to cut insert shutoff valves in the two pipes feeding the shower head. The fotos below show my OZO H/W cylinder system with two pressure cylinders. How to depressurise them to allow cutting the 15ml copper shower pipes?, or do I have to drain the HW cylinder? .........Thanx .......nick

Posts: 1
Joined: Sun Feb 02, 2014 6:14 pm


Simply Build It

Postby stoneyboy » Sat Feb 15, 2014 11:16 pm

Turn off all mains water into your property and turn on the shower, all flow -hot and cold should stop after a short while therby enabling you to fit the valves. There will be water retained in the pipework so allow for this - turning on the lowest hot and cold taps may drain this down.
Posts: 2715
Joined: Wed Dec 10, 2008 6:44 pm

Display posts from previous
Sort by
Order by


  • Related Topics