Domestic Immersion Heater


Postby murphcb » Wed Jul 11, 2007 11:46 pm

I fitted new ThermTec dual Immersion heater. For first few days water was too hot so I tried to lower the temperature by turning the adjustment screw to the right (about half way). I had to turn it to the right because it was already in the 'fully-left' position. It seemed to work for about a day (i.e. on time switch, on for about two hours). It then ceased to function and I found that the safety function seemed to have cut in. I have pressed the button to re-start the heater and am hoping it will work. I cannot understand why it cut out and i am wondering what I did wrong. Can anybody advise me, please? I should add taht nowhere in the insrruction was it clear how one should operate the temperature control.
murphcb
Rank: Labourer
Progress to next rank:
0%
Posts: 1
Joined: Wed Jul 11, 2007 11:29 pm

Sponsor

Simply Build It

Postby johnb » Tue Jul 17, 2007 4:04 pm

hi murph normaly they have a plus or minus sign but are difficult to read but if you operate the safety button too many times you will need a new thermostat try a setting nearer the middle all the best john
johnb
Rank: Ganger
Progress to next rank:
22%
Posts: 83
Joined: Fri Jul 13, 2007 9:09 am

Display posts from previous
Sort by
Order by



  • DIY How to Project Guides

  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!



 


  • Related Topics