Dual element towel rail


Postby Lawrence » Tue Sep 04, 2007 4:59 pm

Can I install an electric (dual element) on a towel rail in a bathroom via a 13A fused spur? The element will be rated at a maxiumum of 1000W

Should it have a dedicated RCD on the spur as well?

With a dual electric element, does this remove the need to supplementary bond the towel rail?

thanks
Lawrence
Posts: 50
Joined: Mon May 07, 2007 7:04 am

Sponsor

Simply Build It

Postby BLAKEY1963 » Tue Sep 04, 2007 11:05 pm

[quote="Lawrence"]Can I install an electric (dual element) on a towel rail in a bathroom via a 13A fused spur? The element will be rated at a maxiumum of 1000W

Should it have a dedicated RCD on the spur as well?

With a dual electric element, does this remove the need to supplementary bond the towel rail?

thanks[/quote]

LAWERENCE
YOUR PART REGISTERED SPARKY WOULD ONLY BE TOO
HAPPY TO GIVE U ADVICE. NOTIFIABLE WORK. NOT DIY
COPPER PIPEWORK THROUGHOUT SUPLEMENTARY
BONDING REQUIRED.
ALSO 30 MILLIAMP RCD REQUIRED USUALLY INCORPRATED IN A SPUR
BLAKEY1963
BLAKEY1963
Posts: 654
Joined: Wed Jun 13, 2007 10:57 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics