Edges of vinyl flooring
Fillers, sealants and adhesives for all types of DIY work. Help, advice and information on all aspects of this subject

4 posts   •   Page 1 of 1
Sagalout1954
Apprentice
Apprentice
Posts: 17
Joined: Thu Jun 12, 2008 3:08 pm

Edges of vinyl flooring

by Sagalout1954 » Tue Aug 12, 2008 3:36 pm

Had vinyl flooring fitted in bathroom, round some of the edges where it meets the skirting there are slight gaps. maybe fitter wasn't so hot!

Tried filling a small section with silicone filler with one of those 'gun' things but very messy. Any ideas other than putting beading and painting it white like the skirting (bit like you might have with laminate).

kbrownie
Project Manager
Project Manager
Posts: 1995
Joined: Mon Mar 05, 2007 9:36 pm

by kbrownie » Thu Aug 14, 2008 12:35 pm

Silicone probally best idea, but there is a knack to it, remember to have hole size on cartridge just a little bigger than gap, run even lines, leave about 2/3 mins then wet finger with soap water and smooth in.
Regards
KB

mdpmspitfire
Tradesman
Tradesman
Posts: 36
Joined: Wed Nov 26, 2008 9:32 pm

by mdpmspitfire » Fri Nov 28, 2008 8:37 pm

if you are not too hot with the gun, mask it off first and remove tape soonest when sealer has been applied

TheDoctor5
Posts: 1381
Joined: Tue Jan 20, 2009 9:17 am

by TheDoctor5 » Mon Jan 26, 2009 9:40 am

Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!

4 posts   •   Page 1 of 1
It is currently Mon Apr 08, 2024 10:31 pm