Fitting a cold water storage cistern


Postby mikegm » Sat Jun 28, 2008 12:32 pm

A friend asked me recently about changing his CWSC. (His present one is a fibreglass model)At present he says there is a lot of water hammer. I believe he mentioned aTorbek ball valve. But whichever it was, it was a plastic one (part three) Should you only use the Brass valve (part two) in a CWSC?
mikegm
Posts: 3
Joined: Wed Jun 25, 2008 11:52 am

Sponsor

Simply Build It


 


  • Related Topics