fitting a gas hob
Information, help and advice on many gas related subjects from gas fires to domestic appliances

5 posts   •   Page 1 of 1
uk_ducati
Ganger
Ganger
Posts: 80
Joined: Wed Feb 13, 2008 8:11 pm

fitting a gas hob

by uk_ducati » Thu Apr 02, 2009 9:30 pm

hi

i am fitting a gas hob with an electric oven directly below it. in the MI it states i need to fit a seperator panel 15mm from the base of the hob. does anybody have any idea what material this panel should be made of.

cheers

paul

Steve the gas
Site Agent
Site Agent
Posts: 780
Joined: Sun May 04, 2008 8:07 am

by Steve the gas » Sat Apr 04, 2009 5:02 am

Hi,

I would think any thinnish non-combustable material eg the asbestolux stuff - cementitious fibre board.

Hth

uk_ducati
Ganger
Ganger
Posts: 80
Joined: Wed Feb 13, 2008 8:11 pm

by uk_ducati » Sat Apr 04, 2009 3:33 pm

hi

thanks for the reply

any idea where i could get some from, or would plaster board do?

paul

Steve the gas
Site Agent
Site Agent
Posts: 780
Joined: Sun May 04, 2008 8:07 am

by Steve the gas » Sun Apr 05, 2009 7:53 am

Hi Paul,

Any good builders merchants- they use it on roof construction on a gable end near the eaves to help support the overhanging slates/tiles

Hth

uk_ducati
Ganger
Ganger
Posts: 80
Joined: Wed Feb 13, 2008 8:11 pm

by uk_ducati » Sun Apr 05, 2009 3:22 pm

hi

yes i know the stuff

cheers for that

paul

5 posts   •   Page 1 of 1
It is currently Tue Mar 19, 2024 11:47 am