Main navigation


Fitting Keyless Lock and Question About Drilling Holes
Post your questions and get answers concerning many areas of this subject

   Post Reply
2 posts   •   Page 1 of 1
ellanvannin54
Apprentice
Apprentice
Posts: 7
Joined: Thu Jun 21, 2007 1:45 pm

Fitting Keyless Lock and Question About Drilling Holes

by ellanvannin54 » Fri Mar 10, 2017 10:32 am

Hi, In the instructions for this keyless lock (it's a push button) they say to drill 4 x 10mm holes horizontally then make it into a slot. What is this slot for? There is nothing to go into it as both sides of the lock are flat!
Advise please?
thekeymurphy
Apprentice
Apprentice
Posts: 11
Joined: Tue Jul 11, 2017 9:52 am

Re: Fitting Keyless Lock and Question About Drilling Holes

by thekeymurphy » Wed Jul 19, 2017 2:19 pm

Could you post a link or image as to the exact lock please?
   Post Reply
2 posts   •   Page 1 of 1
It is currently Tue Apr 16, 2024 3:33 pm
Return to “Ironmongery and Locks Forum”