fixing corrugated sheets


Postby Doris shut » Sun Sep 18, 2011 2:02 pm

Hi
I hope someone can help with this.
I want to cover an alleyway with corrugated plastic to use for storage.
It’s 2m wide x 3m long. There are built up walls on three sides. I’m screwing battens to these sides with a purlin to support the middle. I’m not sure how to fix the final sheet. I won’t be able to reach to secure it. Someone suggested to fix from the inside with a toggle fixing but I’m not sure. Any advise will be welcome.
Thanks
Chris
Doris shut
Posts: 1
Joined: Sun Sep 18, 2011 1:46 pm

Sponsor

Online roofing products and solutions

Postby welsh brickie » Mon Sep 19, 2011 4:31 pm

you normally start 1 end to the other,and lean over to fix it with a screwcap and rubber gromit ,but if you cant do it,use clear silicone and lay a bead of sealant the entire length before laying the sheet on top then lay something heavy on top for the mastic to squeeze tight against the other.
welsh brickie
Posts: 1881
Joined: Sat Apr 12, 2008 7:54 am


Display posts from previous
Sort by
Order by


 


  • Related Topics