Laminate Floor Planning

[rich0148]

Hi all

I have a L shaped hallway which means that laminate floor must go in one direction (and also I have other flooring which goes in same direction) but my issue is that part of it is quite narrow and the planks must go vertically accross. This equals 2 peices and about 8-10cm. I am thinking that this much cutting and then throwing away the remaining bit is very wasteful, also all of these short peices do not look to good and I guess are not so stable.

Any suggestions on planning and cutting?

Thanks

Rich

[welsh brickie]

try laying it on a 45 degree pattern

[rich0148]

45 degree pattern... never thought of that!