No Cold Feed to My Bath


Postby darlow84 » Thu Jul 15, 2010 9:41 am

Hi,

Any help would be greatly appreciated. I recently had a new washing machine fitted in my 1 bedroom flat. The washing machine is cold water feed only. Since then, my bath and shower combi has only been receiving hot water to both the taps and the shower. This means that the water is only ever scalding hot. If I try and make the shower anything less than scalding hot then the shower turns off. Is this linked to the cold feed on the washing maching or is it unrelated?

I'd rather not get a plumber out yet until I've tried everything possible. Any suggestions on here would be great!

Thanks.......
darlow84
Rank: Labourer
Progress to next rank:
0%
Posts: 1
Joined: Thu Jul 15, 2010 9:34 am

Sponsor

Simply Build It

Postby plumbbob » Thu Jul 22, 2010 9:03 pm

The only thing I can think of is when the water was turned off and drained down so the washer could be fitted, when it was turned back on, it left an airlock in the cold feed to the shower and bath which I presume are low pressure feeds????
plumbbob
Rank: Project Manager
Posts: 1873
Joined: Wed May 07, 2008 9:59 pm

Display posts from previous
Sort by
Order by



  • DIY How to Project Guides

  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!



 


  • Related Topics