No Water From Hot Tap - Changed Washer - Still No Water!

Postby slapmatt » Thu Nov 05, 2009 7:50 pm

The water stopped flowing from the hot tap on our bath, so I successfully changed the washer (it was mullered) and re-fitted everything.

Now the hot tap will only turn about three-quaters of a revolution and still no water comes out. If I manually turn the whole value slightly with a spanner the water flows freely - as if the tap is not opening the value enough (if that makes sense).

Please advise before the wife gets home!
Posts: 1
Joined: Thu Nov 05, 2009 7:39 pm


Simply Build It


  • Related Topics