PIR Replacement - different colour wiring


Postby gordonc » Thu May 24, 2007 12:18 pm

My old PIR had the usual E,N & L connected, but it also had a black & white wire going into a port which was connected to a black wire within my flex cord (A flex cord leads from the security light unit to the separate PIR).

Which port does the black wire from the flex go into the new PIR sensor?. (I have E,N and 2 Live ports on the new PIR).

Thanks
gordonc
Posts: 2
Joined: Mon May 21, 2007 12:06 pm

Sponsor

Simply Build It

Postby sparx » Fri May 25, 2007 5:45 pm

Hi, look at your 2 'live' terminals probably have other markings such as L, SL or L1, L2, may have drawing inside cover lid,
normally L or L1 is from mains & SL / L2 is switched line back from PIR,
regards SPARX
sparx
Posts: 2166
Joined: Wed Mar 21, 2007 8:33 pm
Location: The fifth continent.


Postby gordonc » Fri Jun 01, 2007 11:46 am

Cheers Sparx! - It's easy when you know how! :)
gordonc
Posts: 2
Joined: Mon May 21, 2007 12:06 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics