Programastat TRT037 wireless room thermostat


Postby scotorca » Fri Aug 20, 2010 6:49 pm

Can anyone please help with the connecting of the above? There is a wiring diagram, but I just don`t understand what to do. Any help would be greatly appreciated.
scotorca
Posts: 7
Joined: Tue Dec 02, 2008 3:30 pm

Sponsor

Simply Build It

Postby sparx » Sat Aug 21, 2010 9:03 am

Hi,
looking at instructions it looks pretty simple to me.

Depends on your system, but for a combi you put RX(receiver) next to boiler and loop a L & N supply to it then bring the boiler switch line(call) from N/O term. of RX

It appears to need a link between L & Common terms. (or another wire from boilers control out if a Bosch-Worcester)

Put batts in remote unit and set up.

If using a non combi set up there are too many variables to guess without knowing your system.
sparx
Posts: 2166
Joined: Wed Mar 21, 2007 8:33 pm
Location: The fifth continent.


Postby scotorca » Sun Aug 22, 2010 1:20 pm

[quote="sparx"]Hi,
looking at instructions it looks pretty simple to me.

Depends on your system, but for a combi you put RX(receiver) next to boiler and loop a L & N supply to it then bring the boiler switch line(call) from N/O term. of RX

It appears to need a link between L & Common terms. (or another wire from boilers control out if a Bosch-Worcester)

Put batts in remote unit and set up.

If using a non combi set up there are too many variables to guess without knowing your system.[/quote]

[b]Hi, thanks for the quick response. The boiler is not a combi, it is a Baxi Solo 3 PFL range with powered flue if that helps?[/b]
scotorca
Posts: 7
Joined: Tue Dec 02, 2008 3:30 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics