pumped water system problem


Postby russ guilfoyle » Sun Jan 11, 2009 10:19 pm

hi, this is my first time posting and i hope that you can help me. we have a pumped water system in our house, (salamander esp 100 cpv) we had to turn off the water supply the other day and since it was turned back on the pump has been running for approx 30 seconds, stopping for 1 or 2 seconds and then running again. i have turned on the cold taps and then the hot taps thinking that maybe there was some air in the system but there has been no change. does anyone have any ideas? thanks in advance.
russ guilfoyle
Posts: 3
Joined: Sun Jan 11, 2009 10:08 pm

Sponsor

Simply Build It

Postby stoneyboy » Mon Jan 12, 2009 10:56 pm

russ guilfoyle,
Sounds like an airlock into the pump - leave the taps on for a while and see if you can encourage enough air to come out to clear the problem.
end
stoneyboy
Posts: 2708
Joined: Wed Dec 10, 2008 6:44 pm


Postby russ guilfoyle » Tue Jan 13, 2009 8:31 pm

thanks for that, will try it. :D [color=darkblue][/color]
russ guilfoyle
Posts: 3
Joined: Sun Jan 11, 2009 10:08 pm


Postby swidders » Tue Jan 13, 2009 11:09 pm

maybe worth downloading an installation guide from salamander.co.uk and check the commissioning page.
swidders
Posts: 90
Joined: Sat Jan 10, 2009 11:32 pm


Postby swidders » Tue Jan 13, 2009 11:09 pm

maybe worth downloading an installation guide from salamander.co.uk and check the commissioning page.
swidders
Posts: 90
Joined: Sat Jan 10, 2009 11:32 pm


Postby TheDoctor5 » Thu Jan 29, 2009 1:35 pm

If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.
TheDoctor5
Site Admin
Posts: 1385
Joined: Tue Jan 20, 2009 9:17 am


Display posts from previous
Sort by
Order by


 


  • Related Topics