re-hanging kitchen cupboard door


Postby dfbmorgan » Sun Nov 09, 2008 8:49 am

We had a kitchen fitted last year and two of the doors are hanging loose from the top hinge and therefore we have to lift the doors slightly to close them. There is a large gap at the join at the top of the door which narrows at the bottom. It looks as if the door is just too heavy. We've tried tightening the hinge but this hasn't worked. Any tips?
dfbmorgan
Posts: 1
Joined: Sun Nov 09, 2008 8:42 am

Sponsor

Simply Build It

Postby ollyburton » Thu Nov 13, 2008 3:19 pm

dfbmorgan wrote:We had a kitchen fitted last year and two of the doors are hanging loose from the top hinge and therefore we have to lift the doors slightly to close them. There is a large gap at the join at the top of the door which narrows at the bottom. It looks as if the door is just too heavy. We've tried tightening the hinge but this hasn't worked. Any tips?
hello there on the hinge is a screw to the rear undo this resit door and tighten that should do if not try replacing hinge pennies to buy from bnq
________
vapir no2
Last edited by ollyburton on Thu Feb 03, 2011 5:50 pm, edited 1 time in total.
ollyburton
Posts: 21
Joined: Thu Nov 13, 2008 1:55 pm


Postby TheDoctor5 » Fri Jan 23, 2009 8:45 am

Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!
TheDoctor5
Site Admin
Posts: 1385
Joined: Tue Jan 20, 2009 9:17 am


Display posts from previous
Sort by
Order by


 


  • Related Topics