Removing Door to Change Bottom Seal of Weatherstip


Postby Old-But-Keen » Fri Apr 01, 2016 11:29 am

Hi All, my first post so please be gentle
I found a piece of my bottom weatherstrip hanging from my door and decided it would be a good idea to pull the rubber strip out and replace it
However, I didn't take into consideration that at some time i would need to remove the door to turn it upside down in order to refit the strip
I am concerned about lifting the door off its hinges in case I break something and would ask for your help in reassuring me that this is the correct way to remove the door
I cant find a make on the door so attach to photos that may help

Thanks
Attachments
IMG_20160401_111611-2.jpg
this has 3 hinges spaced equally
IMG_20160401_111559-2.jpg
Old-But-Keen
Rank: Labourer
Progress to next rank:
25%
Posts: 2
Joined: Fri Apr 01, 2016 11:10 am

Sponsor

Simply Build It

Postby welsh brickie » Fri Apr 01, 2016 9:01 pm

its the old flag hinges, open the door fully and simply lift it up, its on a pin system and refit the same way
welsh brickie
Rank: Project Manager
Posts: 2596
Joined: Sat Apr 12, 2008 7:54 am

Postby Old-But-Keen » Fri Apr 01, 2016 10:49 pm

Thanks for your prompt reply. I will tackle this next weekend
Many thanks
Old-But-Keen
Rank: Labourer
Progress to next rank:
25%
Posts: 2
Joined: Fri Apr 01, 2016 11:10 am

Display posts from previous
Sort by
Order by



  • DIY How to Project Guides

  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!



 


  • Related Topics