Replacing a VIPER in an alarm system


Postby DIY_Junkie » Tue Jun 29, 2010 10:28 am

Hi there,
Can anyone help me on this one? I've had a new front door fitted (white) and wanted to change the original shock sensor & magnetic contacts (brown) to white. I have 8 core wire, 2 of which (orange and brown) are feeding a panic alarm adjacent to the door. That leaves me 6 wires. Original set up and proposed set up shown in the wiring diagram image. Questions are...1) Where should the green wire now go? and 2) Should there be only 1 white wire going into the 'ALARM' contacts?

Google for wiring diagram at "ceed-scotland.com/temp/alarm_wiring.gif"

Thanks in advance!
DIY_Junkie
Posts: 8
Joined: Tue Jun 10, 2008 8:33 am

Sponsor

Simply Build It

Postby ericmark » Tue Jun 29, 2010 5:09 pm

Even if I did know I would not publish on a web site. The whole idea is that people can't find out how to disable the alarm. As a result many firms use their own wiring diagram so it is not as easy for the would be thief to work out how to by-pass it.
I would advise you also remove that wiring diagram before it gets into the wrong hands.
ericmark
Posts: 1240
Joined: Fri Oct 02, 2009 8:49 pm
Location: Mold, North Wales.


Display posts from previous
Sort by
Order by


 


  • Related Topics