Solid Fuel heating
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

3 posts   •   Page 1 of 1
melinka
Labourer
Labourer
Posts: 1
Joined: Sun Mar 11, 2007 4:05 pm

Solid Fuel heating

Post by melinka » Sun Mar 11, 2007 4:16 pm

I have hot water but radiaters do not heat up on my solid fuel boiler, it is a Parkray. I have bled the system including draining and refilling completely. It works for about one week then fails, I have to go through all the proceedures again. It appears to have an air lock but I cannot work out what is causing it. The pump is running OK. Any ideas?[/b]

Cpt Nemo
Apprentice
Apprentice
Posts: 12
Joined: Thu Mar 08, 2007 4:49 pm

Post by Cpt Nemo » Tue Mar 13, 2007 5:51 pm

Hi melinka

Are there any motorised valves which would control the flow of water between the hot water side and the radiators in your system? If so, it might be possible that one of them has a fault.

Cheers
Jim
PS You can also find out more about the Weekend Plumbing course and our CH & Wiring Controls course by following the link at the bottom of each project on this site.

thedoctor
Posts: 2530
Joined: Sat Apr 08, 2006 12:15 pm

Post by thedoctor » Fri Mar 16, 2007 12:30 pm

MANY OF THE ANSWERS TO YOUR POSTS CAN BE FOUND, WITH DIAGRAMS, IN THE DIYDOCTOR PROJECTS SECTION. CLICK HERE www.diydoctor.org.uk/projects.htm

3 posts   •   Page 1 of 1