tiling over a wood fllor
Advice and information on tiling and fixing tiles to a variety of surfaces

2 posts   •   Page 1 of 1
dan007
Apprentice
Apprentice
Posts: 12
Joined: Wed Jun 11, 2008 4:23 pm

tiling over a wood fllor

Post by dan007 » Sun Jul 03, 2011 7:15 am

Please help i have laid 18mm tongue & groove floring in my shower room & am going to lay wbp ply over the top so i can tile on this i am going to seal this with a mix of sbr bond & cement slurry then tile with floor tiles my questions are what thickness ply do i need (i dont want to raise floor to high was thinking of 6mm ?) & am i sealing it correctly & whaT adhesive do i use & is the grout & adhesive better if i get it in powdered form or ready mixed i have been told so many different things please help many thanks

welsh brickie
Project Manager
Project Manager
Posts: 2610
Joined: Sat Apr 12, 2008 7:54 am

tiling

Post by welsh brickie » Tue Jul 12, 2011 6:40 am

6mm is ideal screw it down every 150mm to ensure no movement.

2 posts   •   Page 1 of 1
It is currently Wed Mar 13, 2024 10:23 pm