Hi i am a bit of a quandary because I bought some marble floor tiles I wanted to lay in place of a lino covered piece plywood which I noticed was very wet round the toilet and sink area.At first i thought the whole floor area would be screeded, as it was round the toilet and sink, but as I proceeded to remove the ply discovered half is parquet(not laminate).The question is what should I do ? Without the ply the height is just right for tiling as that would mean the tiles would be the same height as the flooring in the adjacent hallway.Either i tile over the whole lot or remove the parquet flooring and replace with further screed before tiling.Presumably the whole lot would have to dry before laying.The other option I thought of was returning the tiles and laying some kardean , which is much thinner, over a fresh piece of plywood. I would welcome any advice ,thank you
DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!