unwanted pull switch
Ask questions and find answers to many subjects relating to electrics and electrical work

3 posts   •   Page 1 of 1
nig1012
Labourer
Labourer
Posts: 2
Joined: Sat Nov 10, 2007 2:10 pm

unwanted pull switch

by nig1012 » Sat Nov 10, 2007 2:55 pm

i have just taken a pull switch out the bedroom cus it was no longer needed so heres my question

cus i have disconnected the wires my switch in the bedroom no longer works. i have bought 1 of those round junction boxes with 3 screw connectors so which coloured wires go with which to complete the loop?

1 cable has black,red and green wires and the other cable has blue,yellow,red and green wires. please help cheers

kuzz
Ganger
Ganger
Posts: 134
Joined: Sat Nov 03, 2007 3:37 pm

by kuzz » Sat Nov 10, 2007 9:59 pm

Personally I'd just put a new switch wire from the light down to the switch on the wall. But if you use a junction box here's how. In the junction box connect the earths [green] together. You have 2 connections left. From the red black cable red goes in one connection, black in the other. From the red yellow blue cable put the red with the red and the blue in with the black. Then put the yellow in with the two reds.

nig1012
Labourer
Labourer
Posts: 2
Joined: Sat Nov 10, 2007 2:10 pm

by nig1012 » Sun Nov 11, 2007 4:06 pm

cheers kuzz ur a star

3 posts   •   Page 1 of 1
It is currently Thu Mar 28, 2024 2:50 pm