Upvc doors


Postby PETER K. » Sun Apr 27, 2008 5:07 pm

[b]I have a door which needs to be (Toed and Healed) my problem is how to take off the beading on the door. Thanks Pete.[/b]
PETER K.
Posts: 2
Joined: Sun Apr 27, 2008 4:57 pm

Sponsor

Simply Build It

Postby welsh brickie » Mon Apr 28, 2008 2:33 pm

to remove the bead you will need a flat wide sharp wood chisel or a
thin scraper
to remove the bead place the chisel/scraper inbetween the frame and the
bead, tapping with the hammer prise the bead slowly continue tapping or it will go back in,start at the middle of the door on the longest beads first.
once removed to toe and heal the door,keep the door closed not locked
you will ned a glazing spade its the safest way to lift the frame off the
glass,then slide the required packer on top of the existing ones there.
when replacing the beads use a glass cleaner to make the rubber slide on the glass ,this will prevent breakages.
welsh brickie
Posts: 1958
Joined: Sat Apr 12, 2008 7:54 am


Postby PETER K. » Tue Apr 29, 2008 2:04 pm

[quote="welsh brickie"]to remove the bead you will need a flat wide sharp wood chisel or a
thin scraper
to remove the bead place the chisel/scraper inbetween the frame and the
bead, tapping with the hammer prise the bead slowly continue tapping or it will go back in,start at the middle of the door on the longest beads first.
once removed to toe and heal the door,keep the door closed not locked
you will ned a glazing spade its the safest way to lift the frame off the
glass,then slide the required packer on top of the existing ones there.
when replacing the beads use a glass cleaner to make the rubber slide on the glass ,this will prevent breakages.[/quote]
PETER K.
Posts: 2
Joined: Sun Apr 27, 2008 4:57 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics