Whilst investigating a draught coming through a 3 pane DG unit I discovered it was caused by the window frame itself being slighly bowed. On a closer look this was seen to be due to the actual side frame the window was set in being very slightly bowed in the middle, as if pressure had been exerted from the top. there was some evidence of cracking in the plaster around the frame too. I guess that over time (the units are around 20+ years old) that the frame has moved or twisted a little and caused the bowing. Is there anything that can be done or is it a case of renewing the whole unit entirely? any advice gratefully received! Thanks
Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!