0845 634 2179

Your Shopping Basket

0 items

£0.00

Bostitch 3.1 x 90mm 28° Stick Nail Ring Shank Galvanised (2000)

Gauge/Diameter (mm) 3.1
Length 90
28° Collation Angle
SKU S310R90G8
Profile RING
Finish G8
Description STICK NAIL 3.10-90 RING GAL8 2M
Qty per box 2000

Will also fit the N80SB, FW28WW-E, N100S

£58.91
OR

Bostitch 3.1 x 90mm 28° Stick Nail Ring Shank Galvanised (2000)

Click on above image to view full picture

Details

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments.

28° Collation Angle

Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out.

(Remember only tools fitted with sequential trip should be used when working up a ladder).

Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.

Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.

Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

3.1 x 90mm 28° Ring Shank Galvanised (2000)

We deliver throughout the UK and standard delivery times are 2-5 working days. We try to exceed this delivery time wherever we can. We also offer a express delivery service when available giving a next working day service if ordered before 1 pm (10 am for Eco Solutions products). Confirmation of delivery will be made on receipt of the order. 

We will always try to exceed our stated delivery times where possible or dispatch orders for delivery on the next working day after our cut-off whenever possible. 

Our returns policy allows you to return any item if it is not what you require within 14 days of receipt. This is as long as it has not been used and is returned in its original undamaged packaging.

Bank Holidays

We do experience an increase in orders over Bank holidays which can lead to delays in processing orders. We will endeavour to dispatch all orders as quickly as possible. If there are any potential delays we will contact you directly to inform you.

Free Delivery:

Where products have been quoted as having free delivery or delivery included, this will not apply for Northern Ireland and the Highlands and Islands due to the excess delivery charges incurred reaching these locations. Delivery costs can be seen by entering your postcode into the basket. 

Why do we charge delivery?

A great many of our customers purchase multiple products, so if we build the delivery charges into each item we will in effect be charging delivery on every product in their basket. We think it is fairer to charge a single delivery cost for the contents of the whole basket once. Some products do have delivery included; this is typically because they are dispatched from another location, generally direct from the manufacturer, as there are restrictions to how they can be delivered due to their size, or if they are liquids, for example.

No video available

cards taken