The Wera Kraftform Plus VDE 2go 100 Screwdriver Set includes 11 VDE-insulated Kraftform Plus screwdrivers and the Wera 2go 4 Tool Quiver.
The 100 Series screwdrivers undergo dielectric strength test under a 10,000-volt load in a water bath to reassure users that their screwdrivers have been exhaustively tested for their most important feature; their insulation. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.
The Kraftform Plus handles provide hard gripping zones for high working speeds, whilst soft zones ensure the capability of high torque transfer. The Lasertip* prevents any slip from the recess, whilst protecting the profile both of the screwdriver and the head of the screw. Meanwhile the extra-slim reduced blade diameter** with integrated protective insulation ensures sunken and recessed screws can be accessed without the need to strip-back the insulation.
The ‘Take it Easy Toolfinder’ stamping on the handle allows rapid and easy identification of the required tool with colour-coded output drive and stamp clearly marked on the top of the handle. Profiles covering Pozidriv (black), Phillips (red), TORX® (green) and Slotted (yellow).
*Lasertip relevant to 162i PH, 165i PZ and 160i Slotted screwdrivers.
**Extra-Slim blade relevant to the 160 iS Slotted only.
3 x Slotted: 2.5 x 80mm, 4.0 x 150mm, 5.5 x 200mm.
1 x Extra Slim Slotted: 3.5 x 100mm.
2 x Phillips: PH1 x 80mm, PH2 x 100mm.
2 x Pozi: PZ1 x 80mm, PZ2 x 100mm.
3 x Torx: TX10 x 80mm, TX15 x 80mm, TX20 x 80mm.
1 x 2go 4 Tool Quiver that has a dimensionally stable and robust design that has a high resistance to cuts and punctures. With a hook & loop fastener zone on the reverse side for docking with the Wera 2go Tool Transport System. The handle ensures easy transport; whilst the internal hook and loop partition is variably adjustable for division into as many as five sections, allowing the user to customise the content of their set up whilst maintaining a neat and tidy arrangement.