Our kitchen basin mixer tap needs cartridges replacing, but I am having trouble identifying which would be the correct one. Details as follows:
Kitchen sink mixer tap Blanco (discontinued model) Old cartridge says Kugler L E 95+ on it Photos attached (of the actual cartridges) Dimensions are the same as in attached picture (from the Internet)
Any ideas which replacement I could use, and where to buy, I would be grateful. Need both hot and cold. (Ideally not too expensive as the tap is old and on its way out, and we will be replacing in a few months.)
Hi mrspipecleaner Whilst the inserts on the internet are the same physical dimensions you may find the splined shaft is a different size. Provided you have Swiss needle files and are happy to do some adjustments you could try the ones shown. Suggest you bite the bulled and fit a new tap. Regards S
Hi mrspipecleaner Whilst the inserts on the internet are the same physical dimensions you may find the splined shaft is a different size. Provided you have Swiss needle files and are happy to do some adjustments you could try the ones shown. Suggest you bite the bullet and fit a new tap. Regards S
DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!