Novice DIYer here. We've tiled our kitchen walls successfully and are now moving onto our floor. My partner wanted 600mm tiles so we've had to hire a bigger tile cutter. We've hired this tile bench from HSS:
Its a Combi 250 Tile Saw. Everything about setting it up is fine except we dont know how to fit the pump. The manual on HSS' website says to place it through the pump access hole. This bench does not have a pump access hole, it must be a slightly different model. I was going to upload some shots but the 200KB limit caught me out. But there are shots online of essentially our situation. This pretty much sums it up:
Hi drinkbuckfast I would suggest you contact HSS They should have explained it all to you in the first place. Don't forget that it's your safety at stake, plus you could be liable for any damage to the machine caused by incorrect assembly.
DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!