i somehow managed to pull the top of the door out when trying to climb up on the worktop. The screws have came away from the side of the cupboard and left a big hole. It looks like the hole is too big to screw the screws back into. Its made of ply wood and only about an inch thick and the cupboard door is really heavy. disaster. is there any sort of glue/filller that would fill the hole and hold the weight of the door?
Oddbod
Ganger
Posts:
104
Joined: Sun Jul 15, 2007 12:50 pm
Post by Oddbod »
Thu Nov 08, 2007 9:37 pm
Hi. There are two ways to fix it, the proper way and the quick way.
The proper way is to get hold of an 8mm drill bit (preferably of the “lip and spurâ€
