Hello - was hoping someone could help with (hopefully) a basic question...
Try to self-install a Brita Online Active / mypure A1C, under sink tap filter. The hose connectors (1/2) and adaptors (3/8) that were provided dont seem to fit with the pipes/hose in use currently for the cold mains water feed.
Unfortunately, popping along to the local hardware store isn't really a possibility right now so was hoping to get the right bits I'd need online, if someone could be so kind as to advise what that is...
Have attached pictures. Sorry, realised I should have also maybe done a comparison photo between the supplied ends and what's installed, but hopefully someone more experienced knows whats at play here...
Hi daz123 Assuming you want all your water supplied through the filter, remove the nut directly above the stop cock, fit the female flexible onto this with a washer between them. Then fit the bits removed onto the male part of the flexible and then reconnect your pipe work using the existing parts. Regards S
DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!
by 