flues, two appliances, one flue?
Information, help and advice on many gas related subjects from gas fires to domestic appliances

4 posts   •   Page 1 of 1
moinnes
Labourer
Labourer
Posts: 2
Joined: Tue Aug 26, 2008 10:42 pm

flues, two appliances, one flue?

by moinnes » Tue Aug 26, 2008 10:49 pm

this is going to sound ridiculous but can i run a gas fire and a gas boiler through the one flue exit .... to join them up and exit them through the one roof flue ... am i being ridiculous?

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Wed Aug 27, 2008 11:35 am

No, extremely dangerous, as the boiler will be room sealed, fanned flue, and the fire will probably be open flue. One appliance per flue.

htg

AdamsHeating
Ganger
Ganger
Posts: 121
Joined: Fri Aug 08, 2008 11:49 am

by AdamsHeating » Wed Aug 27, 2008 11:47 am

Good call htg. As he/she(!?!) says you have two different flue types so it would most likely end up in you falling into a deep sleep...

There are special requirements for flue sharing.

Both appliances have to be of the same flue type and have certain extra safety properties.

This is outlined in the corgi 4th edition P.294 under common chimneys.

I know there is a fifth edition but... £19... rip off.

moinnes
Labourer
Labourer
Posts: 2
Joined: Tue Aug 26, 2008 10:42 pm

alright, i was being ridiculous

by moinnes » Wed Aug 27, 2008 11:28 pm

thanks guys, things arn't as simple as you imagine they are, there's a whole lot more to it than i imagined .... thanks again and i'll call in the professionals regards m

4 posts   •   Page 1 of 1
It is currently Sat Apr 20, 2024 5:18 am