Hi,
I have a mixer tap in the kitchen which has become very wobbly and leaks around the base.
I can only see one way to tighten the tap, which is the screw around the top, but if I turn this clockwise as far as it will go it just runs out of thread and comes off, so I guess the gap is too big. I cannot see anything underneath to tighten it.
Here are a couple of pictures.
any advice please.
https://1drv.ms/i/s!ArStyk-0E02-rJZx14aiAlGJP8-EYw
https://1drv.ms/i/s!ArStyk-0E02-rJZzyiA4zGX3rSrc7g
