DIY Doctor

Main navigation

Mira Shower - Front Cover Panel Gap

Postby rmsgrange » Mon Jul 06, 2020 4:11 pm


We've got a Mira Sport 9.0 shower (model J03B) installed about 5 years ago.

A couple of days ago the light on the on-off switch stopped working. The shower is still working with no changes to pressure/heat etc. However I've also noticed that the front cover has a small gap at the front towards the bottom - it's only about 1mm and the cover panel is still flush at the top - almost as though it's begun to warp at the bottom. I've checked all the screws and everything seems to be fine.

I don't think the panel has been knocked or that (and I've certainly never had the need or desire to open it up) so I'm assuming this is possibly wear and tear.

My question is could this be related to the light going off and is there any danger of water getting into the shower innards from this gap?
Shower side gap - forum.jpg
Rank: Labourer
Progress to next rank:
Posts: 1
Joined: Mon Jul 06, 2020 3:59 pm


Simply Build It

  • DIY How to Project Guides
  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!

  • Related Topics