Outside light switch and lights

by **ronecc** » Sun Jun 21, 2009 11:52 am

I am fitting a waterproof light switch to two exterior lights. My switch has three terminals numbered, L, 1 and at the bottom 2. All my wires are brown, blue and yellow/green. Which go where?

by **kbrownie** » Sun Jun 21, 2009 7:10 pm

Have you contacted building controls as this work comes under part p of building regs, or is this replacing an old switch?
KB

by **bd3cc** » Sun Jun 21, 2009 9:40 pm

Brown to L, blue to either 1 or 2: if incorrect switch will be upside down.You may find marked on the switch" for 1 way use 1 or 2, if so follow that instruction.
Blue should be sleeved/flagged as a brown.
green/yellow in a dummy terminal, which may be in the mounting box.

by **ronecc** » Sun Jun 21, 2009 11:42 pm

\\\\thanks for the replies. Got it sorted now. Brain must have been out of gear and could not remember what went where.