PUMA Bolier-Rads work, but the bath water stays hot for 1min
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

2 posts   •   Page 1 of 1
nashy
Apprentice
Apprentice
Posts: 7
Joined: Mon Nov 03, 2008 12:15 pm

PUMA Bolier-Rads work, but the bath water stays hot for 1min

by nashy » Tue Nov 25, 2008 12:54 pm

Hi Guys

I have a PUMA COMBI boiler - and it kinda works fine
though one thing i cannot get is a constant flow of hot water for a bath for example

Heating works fine - I think one radiator in the spare room doesn't give out much heat - could this affect the hot water???

Should i have my thermostat set to a certain number

Sorry I'm a dizzy moo, but any help would be awesom

I do get hot water from the bath but for only 1 min then goes cold
should i set my thermostat up to a certain level?

Tammy :wink:

Steve the gas
Site Agent
Site Agent
Posts: 780
Joined: Sun May 04, 2008 8:07 am

by Steve the gas » Wed Nov 26, 2008 5:28 am

Hi Tammy,

Yes you need your boiler stats set to a sensible setting. Try a few and see what happens but could be a few other reasons too.

2 posts   •   Page 1 of 1