Using JG Speedfit on 1/2 Inch Copper Pipe
All aspects of plumbing questions and answers, help, tips and information

3 posts   •   Page 1 of 1
wildobc
Labourer
Labourer
Posts: 2
Joined: Wed Nov 25, 2020 6:28 pm

Using JG Speedfit on 1/2 Inch Copper Pipe

by wildobc » Wed Nov 25, 2020 6:38 pm

Is it possible to use a 15mm JG Speedfit push fit straight coupler directly on to 1/2" copper pipe.

stoneyboy
Project Manager
Project Manager
Posts: 6419
Joined: Wed Dec 10, 2008 6:44 pm

Re: Using JG Speedfit on 1/2 Inch Copper Pipe

by stoneyboy » Fri Nov 27, 2020 1:40 pm

Hi wildobc
Yes but only if you are using a pipe cut by a rotating cutter eg pipeslice.
Suggest you use a small amount of lubricant on the pipe before you insert it, mark the insert length on the pipe so you know it is correctly located.
Regards S

wildobc
Labourer
Labourer
Posts: 2
Joined: Wed Nov 25, 2020 6:28 pm

Re: Using JG Speedfit on 1/2 Inch Copper Pipe

by wildobc » Fri Nov 27, 2020 4:21 pm

Thanks for the advice - will do

3 posts   •   Page 1 of 1
It is currently Thu Mar 28, 2024 8:13 am