cold radiator


Postby hides1968 » Wed Mar 23, 2011 6:04 pm

i replaced a insulation valve on my heating pipe .because the screw was leaking .but the last radiator will not get hot .all the rest are fine.bled the rad but it is full
hides1968
Rank: Labourer
Progress to next rank:
0%
Posts: 1
Joined: Wed Mar 23, 2011 5:43 pm

Sponsor

Simply Build It

Postby lofc » Thu Mar 24, 2011 6:15 am

Heating system probably needs to be balanced. Try turning down all the return valves, one at a time, till last rad gets hot. Only turn the valves slightly. If your`e not sure which are the returns make sure heating is on and feel both pipes going to the rad and the hottest one will be the flow. Hope this helps.
lofc
Rank: Apprentice
Progress to next rank:
10.5%
Posts: 7
Joined: Wed Mar 23, 2011 12:18 am

Postby htg engineer » Thu Mar 24, 2011 6:22 pm

Pressurised system ?

Probably airlocked, make sure both valves to this radiator are open - turn off all other radiators - it will push through.


htg
htg engineer
Rank: Project Manager
Posts: 3224
Joined: Tue May 22, 2007 5:22 pm

Display posts from previous
Sort by
Order by



  • DIY How to Project Guides

  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!



 


  • Related Topics