Digital Shower Processor


Postby southenddave » Mon Nov 26, 2007 9:43 am

Hi,

I am trying to find a sparky to come round and wire in a 3 amp digital shower processor and would like to cut the channel into the wall for the wires and swicth before he comes. Is it likely to be wired in to the ring main or the lighting circuit? That way I know whether to cut up or down the bathroom wall.
All advice greatfully recieved.
Ta,
Dave
southenddave
Posts: 5
Joined: Sun Nov 04, 2007 12:10 pm

Sponsor

Simply Build It

Postby marrtin » Mon Nov 26, 2007 4:27 pm

He will not use the wiring circuit. The shower will need a fused isolator switch located out of reach in a cupboard or outside the bathroom.
marrtin
Posts: 374
Joined: Fri Oct 26, 2007 6:42 pm


Postby southenddave » Wed Nov 28, 2007 10:21 am

Does it then go straight to the consumer unit?
southenddave
Posts: 5
Joined: Sun Nov 04, 2007 12:10 pm


Postby marrtin » Wed Nov 28, 2007 5:11 pm

No, unless that is convenient. The usual is to spur off a ring main although it may be possible to use the immersion circuit.
marrtin
Posts: 374
Joined: Fri Oct 26, 2007 6:42 pm


Postby southenddave » Sun Dec 09, 2007 3:17 pm

Thanks for the help Marrtin. Sparky coming tomorrow to do the wiring now that all the chasing is done.
Thanks again
southenddave
Posts: 5
Joined: Sun Nov 04, 2007 12:10 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics