Fitting a towel radiator
All aspects of plumbing questions and answers, help, tips and information

4 posts   •   Page 1 of 1
yar
Labourer
Labourer
Posts: 1
Joined: Sun Nov 18, 2007 3:24 pm

Fitting a towel radiator

Post by yar » Sun Nov 18, 2007 3:30 pm

Have taken off a radiator and want to replace it with towel warmer which isn't as wide. As well as that there's a 15mm fitting on the inlet and a 22mm on the outlet. Is there any way I can fit the towel warmer without having to rip up the floor (which is ceramic tiled?)

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 5:22 pm

Post by htg engineer » Sun Nov 18, 2007 6:04 pm

Yes you can extend the pipework to fit any size towel rail or radiator - but there will have to have abit pipework above the floor, which some people mind and some don't. Would imagine you already know this, not sure what type of answers you were looking for.

DONFRAMAC
Ganger
Ganger
Posts: 195
Joined: Fri Mar 30, 2007 5:52 pm

Post by DONFRAMAC » Sat Nov 24, 2007 1:40 am

You could use chromed fittings to make the blumbing easier on the eye.

chris_on_tour2002
Project Manager
Project Manager
Posts: 1024
Joined: Thu Aug 30, 2007 9:14 pm

Post by chris_on_tour2002 » Sat Nov 24, 2007 12:03 pm

and a 22-15mm reducer will take care of the pipe size problem. technically no problem, getting the piping to look neat and tidy is the hardest part

4 posts   •   Page 1 of 1
It is currently Tue Feb 20, 2024 7:38 pm