Fitting kitchen / bathroom plinths


Postby otherton » Thu May 17, 2007 6:31 pm

Hi All,
I'm fitting some units in an ensuite to take a basin. I'm having problems with the plinth as it has two returns on it, therefore giving me two external corners to deal with. I've tried mitres, but the laminate chips and gettinga tight fit is impossible. Should I just butt them, and use edge tape on the exposed end of the main front piece?
Thanks
otherton
Posts: 2
Joined: Thu May 17, 2007 6:16 pm

Sponsor

Simply Build It

Postby thedoctor » Fri May 18, 2007 7:37 pm

Either that or use a timber corner piece moulding. These can be bought in any DIY store.
thedoctor
Site Admin
Posts: 2190
Joined: Sat Apr 08, 2006 12:15 pm


Postby will_buckley » Tue May 22, 2007 9:43 pm

or if u havnt fitted the worktop yet or you have alot overhangin on each end, you can fit end panels, i use them on all kitchensthen u only have plinths showing at the front.
will_buckley
Posts: 7
Joined: Tue May 22, 2007 9:02 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics